Control Freak SLAMMO DT8 RGBW Smart LED Dimmer, DALI DT8 RGBW

The SLAMMO DT8 RGBW is an Australian-made, multi-protocol smart LED dimmer designed for constant voltage, common anode LED loads. This model is in a PCB assembly (PCA) form factor, measuring 235 x 67 x 29 mm, and is intended for integration without an external enclosure. Performance & Electrical • Power Handling: Supports a maximum load of 600W @ 24VDC or 300W @ 12VDC in environments 40°C. • Current Capacity: Rated for 10A per channel with a 25A total device limit. • Input Voltage: Operates between 7-48VDC; input voltage must match the DC requirement of the connected LEDs. • High-Resolution Dimming: Features standard 400Hz PWM, with an RDM-selectable 1200Hz dithered mode to approximate a 16-bit dimming curve. Protocol & Control • Multi-Protocol Support: DALI (DT8 RGBW functionality), DMX512, RDM, or DSI. • DALI DT8 Implementation: DALI-2 standards, responding to Type 6 commands, dimming curve selection, and fast fade facilities. • Configurable Outputs: Through RDM, the device can be set to different output types: o RGBW/Normal: 4 individual channels (CH 1-4). o White: 2 pairs for Tuneable White applications (Inputs 1 controls CH 1 & 3; Input 2 controls CH 2 & 4). o RGB: 3 individual channels (CH 1-3) with the 4th output idle. • Manual Configuration: Onboard 10-way dipswitches allow for manual protocol selection and DMX start-addressing (1 to 508). • Reverse PWM option available. Hardware Protection & Monitoring • Fused Outputs: Each of the four outputs is protected by a 15A short-circuit fuse. • Diagnostic LEDs: Four onboard mimic LEDs (Red, Green, Blue, White) provide instant visual verification of channel output levels. • Thermal Management: The PCA has a maximum operating temperature of 70°C and requires adequate air movement for cooling.