Control Freak eDIDIO Series 10 1D 1X Ethernet-enabled Lighting Controller with 1 x DALI Channel and 1 x DMX Output

The eDIDIO Series 10 1D 1X is a DIN-mount lighting controller designed for professional integration of both DALI and DMX512 protocols. This specific "1D 1X" configuration provides one DALI output line and one DMX512 universe output. Core Specifications & Connectivity • Power Input: Requires a 24VDC source (>100mA recommended). • Network Interface: 10/100 Base T Ethernet port supporting DHCP and multiple open TCP sockets for third-party integration. • I/O Capacity: Features 12 digital inputs for potential-free contacts. Four of these can be user-configured as optically isolated outputs. • Form Factor: 4-pole DIN-mount housing with plug-and-play rising clamp connectors for easy maintenance. Control Capabilities • DALI Integration: Manages one DALI line; note that an external DALI Power Supply Unit (e.g., Control Freak UBi Power) is mandatory for DALI bus operation. • DMX Output: Provides one DMX512 universe (up to 1024 channels when using Spektra – not included) with proper signal conditioning. • Internal Logic: Includes 32 programmable lists (8,196 steps) and 10 interrupt-driven schedules. • Translation: Features a built-in DMX512 to DALI translator for up to 16 channels. Advanced Engineering Features • Open Protocol: Uses a 'Protocol Buffers'-based API, allowing any TCP-IP capable system to interact with the device. • Spektra Engine: Integrated colour control supporting up to 6 colours per fixture (RGB/A/WW/CW)13. • Human Interface: 128 x 64 pixel OLED display and a 3-button membrane keypad for local diagnostics, input testing, and DALI device counting. • Maintenance: Supports over-the-air (OTA) firmware updates via the Configurator V2 application.