Hytronik HIM38/RF-COM Wireless PIR / Microwave High Bay Motion Sensor with 1-10V Output - Conduit Mount

The Hytronik HIM38/RF-COM is a wireless, Dual Sense motion sensor designed for use with high-bay lights. It integrates both High Frequency (5.8GHz microwave) and PIR technologies to minimise false triggering while maintaining high sensitivity. Core Technical Specifications • Operating Voltage: 120-277VAC, 50/60Hz. • Load Ratings: o Capacitive: 400VA @ 120V; 800VA @ 220-277V. o Resistive: 800W @ 120V; 1600W @ 220-277V. • Control Interface: 1-10V dimming output supporting tri-level control (100% dimmed off). • Dual Tech Modes: Configurable via remote (sold separately) as HF only, PIR only, HF+PIR (both must trigger), or HF/PIR (either triggers) . • Detection Range: Maximum mounting height of 15m with a detection diameter of up to 18m. RF Networking & Intelligence • Wireless Transmission: Operates at 868MHz (default) with a range of 30m indoors and 50m outdoors. • Grouping: Fast grouping via a 15-channel rotary switch or remote control (HRC-11) for up to 30 units. • Intelligent Photocell: Features a built-in daylight sensor that can automatically switch off fixtures when natural light exceeds programmed thresholds, even if motion is detected. • Zero-cross Relay Operation: Software-driven switching at the zero-cross point to minimize in-rush current and extend relay longevity. Installation & Environmental • Form Factor: Conduit mount. • Environment: Rated for operation between -20°C and +50°C with an IP65 ingress protection rating.