Easy to Install Bluetooth Lighting Control
Hytronik's Bluetooth modules allow you to install, or retrofit Bluetooth control of lighting without the need for an expensive central controller.
There are four modules within the range, all stocked by ADM:
Link to Product Information
|Bluetooth TRIAC Wireless Dimming Module|
|Bluetooth DALI Wireless Dimming Module|
|Bluetooth 1-10V Wireless Dimming Module|
|Bluetooth On / Off Only Wireless Module|
These Hytronik dimming modules are controlled via a Bluetooth app and feature Bluetooth 4 wireless mesh so they can be set up to work in groups, bringing up lights and dimming them down again via the app (except for the HBTD8200S, which only offers on/off switching).
Two inputs for wired momentary switch inputs (Push-to-Make) or occupancy sensors enable the connected lights to be operated without the need for the App.
The app can also be used to set up groups of lights that can be controlled in unison, and to program different ‘scenes’ according the task, such as “reading”, dining”, “relax” etc., or apply the scheduling function to automate switching patterns based around your day. There is also a very handy holiday mode, so your home still looks lived in, whilst you are away.
The Hytronik Bluetooth modules can be used with many light fittings that you would find in a domestic, or commercial setting, the Power Source LED Drivers stocked by ADM.
It should be noted that the HBTD8200T can only be used with devices with a power rating of up to 150 WATTS. The key benefit of the TRIAC dimmable module is that no additional wiring is required. You simply replace the existing dimmer (or light) switches with one of these modules.
For higher powered applications, ADM recommends using the HBTD8200D DALI model together with the Power Source DDV series DALI dimmable LED drivers.
All Power Source LED drivers have a PWM output, so they will dim evenly regardless of the load on the LED driver.
In the meantime, for further information please call ADM on 1300 236 467.