New 120W IP67 KNX LED Drivers with PWM Output

New Product ADM
Product News

ADM now stocks the MEAN WELL PWM-120-KN series of KNX LED drivers. 

 

Like all models within the MEAN WELL PWM series, these LED drivers have a PWM output for even dimming, regardless of the load on the LED driver.  

MEANWELL PWM-120KN

Ordering information: 

Part Number

Ouptut Voltage

Power Output

PWM-120-12KN

12V DC

120 WATTS

PWM-120-24KN

24V DC 120 WATTS

 

They also have an IP67 ingress protection rating, so they are resistant to moisture ingress. If you wish to mount these outside, please be aware that the plastic casing in not UV stablised.  

No LED driver should be mounted in direct sunlight, as this could cause the temperature inside the driver to increase beyond its maximum temperature rating. This has the potential to cause a failure, that would not be covered by the warranty.  

The benefit of using a LED driver with a built in KNX interface is that the need for a DALI ~ KNX gateway is eliminated. This results in a lower cost installation, by reducing the number of components required.  

The MEAN WELL PWM series KNX LED drivers can dim to 0.01% and have a user changeable frequency of up to 4kHz for low flicker operation for IEEE1789-2015 & EU Ecodesign Stroboscopic Visibility Measure (SVM) requirements. 

All models come with a 5-year manufacturer’s warranty.  

Please contact ADM on 1300 236 467 for further information. 

Mean Well LOGO

 

 

19 October 2020