DC Powered DALI RGBCW LED Controller


The Sunricher SR-2309PRO-5C DT8 DALI LED controller is now available from ADM Systems.

This smart device will accept a 12Vdc~36Vdc voltage input. Therefore, it can effectively convert most constant voltage LED drivers into an RGBCW DALI driver. 

Sunricher SR-2309PRO-5C DALI RGBCW LED Controller
Sunricher SR-2309PRO-5C DALI RGBCW LED Controller


It also has a built-in DALI-2 interface to operate on next generation DALI-2 systems and is compatible with single or multi address lighting control setups. 

The SR-2309PRO-5C is designed to operate with DALI DT6 or DT8 systems for full control of RGB, CCT or XY LED Strip. 

It will provide up to 5 channels of 12Vdc~36Vdc constant voltage PWM output and up to 5A per channel (60 to 180W per channel). It should be noted that the output voltage will be equal to the input voltage. 

An impressive dimming range of 0.1%~100% is possible, making the Sunricher SR-2309PRO-5C suitable for many lighting applications, including architectural and entertainment applications. 

You can select from 9 pre-set configuration options to control RGB, CCT or XY. These can be set via the front panel push buttons and display. 

If no DALI system is available, RGB and CCT can still be controlled by a standard momentary AC switch (bell press switch). 

ADM can also supply the MEAN WELL DLC-02 which now has DT8 control enabled. 

The DLC-02 can be used as a DALI master controller to easily connect and control DALI or DALI-2 devices including the Sunricher SR-2309PRO-5C. With the DLC-02 you can easily set groups, scenes, and timers for automatic operation. 

The SR-2309PRO-5C operates comfortably in ambient temperature conditions up to 50°C, making it suitable for use in most of Australia. 

If you would like to see if the Sunricher SR-2309PRO-5C is suitable for your application, please do not hesitate to contact ADM. We will gladly answer any questions that you may have. 

4 July 2023